OnSIP empowers Multicast Paging consequently for each telephone that bolster it. A “page” is a restricted declaration that can transfer data to vast gatherings of individuals rapidly. Not at all like a radio or a telephone call, Multicast Paging does not permit the audience to react to the message.
When you utilize the OnSIP boot server for Polycom telephones, there is a paging catch effortlessly available by means of your telephone’s home screen. The catch is prepared to use when the telephone comes on the web. In any case, the Grandstream telephones that support Multicast Paging require an extra stride after the telephone has enlisted with our boot server.
This post will disclose to you how to set up Multicast Paging on upheld Grandstream gadgets. We bolster paging on the GXP 2130, 2135, 2140, 2160 and 2170 arrangement of telephones and in addition on the GXP 1610, 1620, 1625, 1628 and 1630 arrangement of telephones. The interfaces for the telephones in the 16XX and 21XX line are comparative; on account of this, we’ll show setting up on the GXP2130 to cover both lines.
Take note of: This article is proposed to help clients in getting Multicast Paging up and running rapidly. For a clarification of settings that are not talked about here, please observe the client guides gave at the base of this post.
Here you can see the programmed settings from our boot server. We make one listening address named “All”, which each Grandstream gets from our server.
On the off chance that you need to make extra paging bunches for a business group or distribution center or anything thusly, essentially duplicate the Listening Address from 1 and glue it to an unused field. Make a point to change the port number (:60000) to an unused port. Make a simple to recollect mark so you can keep track then hit Save and Apply.
Since you’ve advised the telephone what to tune in for, you have to reveal to it how to communicate your pages.
On the off chance that you have telephones that you ONLY need to tune in, however not to communicate, you may avoid these next strides. Basically reboot the telephone, and when it returns on the web, it ought to be prepared to get pages.
Virtual Multi-Purpose Keys
To send a Multicast Page on a Grandstream telephone, you should have a comparing Virtual Multi-Purpose Key (VPK) or Programmable Key to communicate to a Multicast Paging bunch. To set this up, go to Settings – > Virtual Multi-Purpose Keys. For our illustration, we will set up two gatherings to communicate: the “All’ gathering and a “Business” bunch.
Here you can see that this telephone has one line enrolled to it. The telephone is likewise observing one BLF line. Since we need to have the capacity to page two gatherings, we should set up one VPK and one Programmable Key.
Here you will see Softkeys and Multi-Purpose Keys (MPK). We will utilize the MPKs.
This is fundamentally the same as the VPKs. In Mode, select Multicast Paging. For Description, give a simple to recall mark. What’s more, for Value, enter in the Paging bunch from the Multicast Paging area of your telephone. Hit Save and Apply, reboot the telephone and when it comes on the web, it ought to be prepared to utilize.